Results 1 to 8 of 8
  1. #1

    BC Network 8000 integration.

    Looking at a project that the owner wants to integrate his relatively new BC Network 8000 system. Have done some research and it looks like the only front-end software that can do this is Tridium/Niagara AX (at least they are the only ones who publish a driver).
    Any thoughts?

  2. #2
    Join Date
    May 2006
    Posts
    389
    There is no such thing as a "relatively new BC Network 8000 system"

    The ASD driver works fine. I would read through the engineering literature for it.

  3. #3
    I need XPSI Software. Can anyone email it to me.

    Thanks

  4. #4
    Join Date
    Jul 2001
    Location
    Canada
    Posts
    1,818
    Seeing that the NETWORK 8000 was actually in production until early 2012 it can be RELATIVELY NEW .

    As for XPSI software check through the controls section there are a few threads on MZII's , there was a poster offering it along with the manuals in PDF form not too long ago.

  5. #5
    Please excuse my ignorance controlgeek, what is an ASD driver (other than the obvious)?

  6. #6
    I have spent more than an hour looking through old threads to find XPSI software with no luck.

    If someone has it can the email it to me?

    Thanks

  7. #7
    Join Date
    Jul 2001
    Location
    Canada
    Posts
    1,818
    Heres the thread http://hvac-talk.com/vbb/showthread....highlight=XPSI check posting #21

  8. #8
    Join Date
    Apr 2008
    Posts
    7
    How do you pull a points list for a Network 8000 with Mirco Zones?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event