Results 27 to 28 of 28
Thread: Have a leaker CVHE ,
-
12-18-2012, 10:24 PM #27
Professional Member*
- Join Date
- Jul 2007
- Location
- The Hot South
- Posts
- 869
We don't use any anti seize when assembling a chiller as it could affect your oil analysis reports and show a failure when there actually isn't one.
-
12-19-2012, 12:03 AM #28
Professional Member
- Join Date
- Mar 2007
- Location
- Home of the newly wed and the nearly dead
- Posts
- 2,941
I agree with this when it's inside the compressor. I also think that if you're going to use the stuff, you have to be meticulous and sparing in the way it's applied.I don't use any on internal components, flat gaskets, or the oil system.The bolts I'm talking about are on the outside of the o-ring and sealant. The anti-seize is contained to the threads. I put a tiny dab on the tip of the bolt and then spin the bolt in a rag, wiping all of it off, except for a very thin line inside each thread.
Truth is still truth, even if no one believes it. A lie is still a lie, even if everyone believes it.
"It's called the american dream because you have to be asleep to believe it" -George Carlin
"A nation of sheep begets a government of wolves" -Edward R. Murrow
"I have problems just like you. One time, my dancing horse almost fell into my car elevator" -Mitt Romney
Buy american made goods & support locally owned businesses!
Reply With Quote
