Results 1 to 6 of 6
Thread: International Harvester Freezer
Hybrid View
-
12-13-2012, 01:43 PM #1
Professional Member*
- Join Date
- Jun 2007
- Location
- Williamsport, PA
- Posts
- 144
International Harvester Freezer
A buddy wants a new compressor for his International Harvester freezer the one that is on it is noisy. Mo# 11FC Ser#45842 B8. The problem is that the numbers on the compressor do not come up for Tecumseh. May be a Americold/Hupp compressor or made by some manufacture I never heard of. Numbers on the compressor are 50G127042 and R4811591G1. Here are some pictures of the unit and compressor. Any info would be helpfull as to what compressor I can put on this.
-
12-13-2012, 05:55 PM #2
Professional Member*
- Join Date
- Feb 2007
- Location
- Fremont, Indiana
- Posts
- 938
Ran those #'s through copeland X-ref and found nothing!
No other #'s???Member of the "Work Exchange Program"
"Will work for knowledge"
"Everyone is a genius. But if you judge a fish on its ability to climb a tree, it will live its whole life believing that it is stupid"
A Einstein
-
12-13-2012, 08:44 PM #3
Professional Member*
- Join Date
- Jun 2007
- Location
- Williamsport, PA
- Posts
- 144
No other numbers I could see.
-
12-13-2012, 11:02 PM #4
Professional Member
- Join Date
- Mar 2003
- Location
- Cochrane, AB
- Posts
- 504
I did the same for a friend's '52 IHC chest freezer. Ended up installing an Embraco, new cap tube and R404a. Works good.
-
12-14-2012, 06:31 AM #5
Professional Member*
- Join Date
- Jun 2007
- Location
- Williamsport, PA
- Posts
- 144
What was the btu capacity of the compressor?
Originally Posted by mspanky
-
12-14-2012, 05:58 PM #6
Professional Member
- Join Date
- Mar 2003
- Location
- Cochrane, AB
- Posts
- 504
I think I sized it at 800 BTU. The old compressor was a 1/6 HP R-22 believe it or not, with a static condenser. This was only a 7 cu ft apartment sized freezer and the only reason I was willing to repair it.
(Low-temp R22 in 1952 seemed ahead of it's time)
Reply With Quote
