Results 1 to 3 of 3

Hybrid View

  1. #1

    Trane YCD300 gas pack heat exchanger

    I will change the heat exchanger in a Trane YCD300 gas pack.Please post any experiences or suggestions you have about this.I would really like to know if you employed a crane service for the removal and replacement of the heat exchanger.Thank you

  2. #2
    Join Date
    Jun 2006
    Location
    midwest
    Posts
    126
    2 guys, 1 for 4 hours and 1 for 8 .No crane needed to install , maybe to get on the roof.

  3. #3
    Join Date
    Jun 2006
    Location
    midwest
    Posts
    126
    Use existing back support under HE, use new bolt that comes with new unit. Most come with inducer and gas valve if ordered. 1 guy for 4 hours, 1 guy for 8 hours.No crane needed to remove and replace, may be needed to get new unit on roof .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event