+ Reply to Thread
Results 1 to 12 of 12

Thread: Walk-In Freezer Not Holding Temp

  1. #1
    Join Date
    Mar 2004
    Location
    Las Vegas, Nevada
    Posts
    1,648
    Post Likes

    Walk-In Freezer Not Holding Temp

    Found the system COMPLETELY flat on Charge. Looks like someone tried something clever. Them clever guys are turning out to be my best referral source...

    Name:  NoWeld1.jpg
Views: 1836
Size:  25.8 KBName:  NoWeld2.jpg
Views: 1869
Size:  21.7 KBName:  NoWeld3.jpg
Views: 1910
Size:  30.7 KB
    Last edited by engineerdave; 12-13-2012 at 10:49 AM. Reason: spelling
    The views and opinions posted here are my own. They do not reflect the corporate policies of my employer and will most likely get me fired at some point.

  2. #2
    Join Date
    Mar 2009
    Location
    Mid-Mo
    Posts
    3,600
    Post Likes
    Is that the magic "solder"? Doesn't look like there's anything on there!?

  3. #3
    Join Date
    Feb 2007
    Location
    Fremont, Indiana
    Posts
    3,275
    Post Likes
    No way!
    Solder compound? The stuff in a red bottle?

    sent from my Samsung Galaxy Note
    Member of the "Work Exchange Program"
    "Will work for knowledge"

    "Everyone is a genius. But if you judge a fish on its ability to climb a tree, it will live its whole life believing that it is stupid"
    A Einstein

  4. #4
    Join Date
    Oct 2011
    Location
    Chicagoland Area
    Posts
    23,572
    Post Likes
    WTF is that? Some type of glue?
    Officially, Down for the count

    YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET

    I know enough to know, I don't know enough
    Why is it that those who complain the most contribute the least?
    MONEY CAN'T BUY HAPPINESS. POVERTY CAN'T BUY ANYTHING

  5. #5
    Join Date
    Feb 2007
    Location
    Fremont, Indiana
    Posts
    3,275
    Post Likes
    Quote Originally Posted by kamersoutdoor View Post
    No way!
    Solder compound? The stuff in a red bottle?

    sent from my Samsung Galaxy Note
    Srry,
    "Solderless Copper Bonding"

    sent from my Samsung Galaxy Note
    Member of the "Work Exchange Program"
    "Will work for knowledge"

    "Everyone is a genius. But if you judge a fish on its ability to climb a tree, it will live its whole life believing that it is stupid"
    A Einstein

  6. #6
    Join Date
    Dec 2005
    Location
    Cincinnati, Oh
    Posts
    11,829
    Post Likes
    I thought it was called:
    HVAC Super Pro

    Or something stupid like that. I remember reading "you'll ask: what did we do with leaks in walls, before hvac super pro?"
    We used a dang torch. and people were happy at the end of the day.

    That product should be named HVAC Super Hack.
    "Better tell the sandman to stay away, because we're gonna be workin on this one all night."

    "Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."

    "Just get it done son."

    Dad adjusted

  7. #7
    Join Date
    Mar 2004
    Location
    Las Vegas, Nevada
    Posts
    1,648
    Post Likes
    Thread Starter
    I don't know what product it was. It was red, resembled a Loctite product, and I was able to break all joinings with only my hands. Whatever they used, it didn't work.

  8. #8
    Join Date
    Jun 2003
    Location
    Chicago, IL
    Posts
    6,067
    Post Likes
    I've used the HVAC superpro on boiler water pipes once. They were in a wall an needed to be cut and capped and I had to work entirely by feel, they could not be seen to use a torch. It worked excellently.

    The stuff I used was purple in color so it probably is not what was used in this case.

    The SuperPro has like 10 warnings all over it that you must sand the fitting with coarse grit cloth and LEAVE THE FILINGS on the pipe and fittings. If you wipe them off it won't harden properly.

  9. #9
    Join Date
    Oct 2012
    Location
    Wisconsin
    Posts
    6,676
    Post Likes
    So was the drier and solenoid put in recently or has it actually been able to run for a while with all the joints glued together with red loctite?

  10. #10
    Join Date
    Mar 2004
    Location
    Las Vegas, Nevada
    Posts
    1,648
    Post Likes
    Thread Starter
    Quote Originally Posted by Mike19 View Post
    So was the drier and solenoid put in recently or has it actually been able to run for a while with all the joints glued together with red loctite?
    One branch of a chain we picked up several months ago, first visit there. Have to assume it ran for a while.
    The views and opinions posted here are my own. They do not reflect the corporate policies of my employer and will most likely get me fired at some point.

  11. #11
    Join Date
    Feb 2012
    Location
    Toronto Canada
    Posts
    1,090
    Post Likes
    That is so bad it isn't even funny it's sad No pride at all!

    Did the red magic glue make it hard to solder it? How much of a charge did he loose?

  12. #12
    Join Date
    Mar 2004
    Location
    Las Vegas, Nevada
    Posts
    1,648
    Post Likes
    Thread Starter
    Quote Originally Posted by OldSchoolMech View Post
    That is so bad it isn't even funny it's sad No pride at all!

    Did the red magic glue make it hard to solder it? How much of a charge did he loose?
    I was concerned about bits and chunks of that stuff finding its way into the TXV, so the solenoid valve and all copper in that section were replaced. With a torch and silfos. One jug of R404a later, had a cold freezer.

    It's too bad, it would be really cool if there were some 'magic glue' that actually worked.

+ Reply to Thread

Quick Reply Quick Reply

Register Now

Please enter the name by which you would like to log-in and be known on this site.

Please enter a password for your user account. Note that passwords are case-sensitive.

Please enter a valid email address for yourself.

Log-in

Posting Permissions

  • You may post new threads
  • You may post replies
  • You may not post attachments
  • You may not edit your posts
  •