Is that the magic "solder"? Doesn't look like there's anything on there!?
Found the system COMPLETELY flat on Charge. Looks like someone tried something clever. Them clever guys are turning out to be my best referral source...
Last edited by engineerdave; 12-13-2012 at 10:49 AM. Reason: spelling
The views and opinions posted here are my own. They do not reflect the corporate policies of my employer and will most likely get me fired at some point.
Is that the magic "solder"? Doesn't look like there's anything on there!?
No way!
Solder compound? The stuff in a red bottle?
sent from my Samsung Galaxy Note
Member of the "Work Exchange Program"
"Will work for knowledge"
"Everyone is a genius. But if you judge a fish on its ability to climb a tree, it will live its whole life believing that it is stupid"
A Einstein
WTF is that? Some type of glue?
Officially, Down for the count
YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET
I know enough to know, I don't know enough
Why is it that those who complain the most contribute the least?
MONEY CAN'T BUY HAPPINESS. POVERTY CAN'T BUY ANYTHING
Member of the "Work Exchange Program"
"Will work for knowledge"
"Everyone is a genius. But if you judge a fish on its ability to climb a tree, it will live its whole life believing that it is stupid"
A Einstein
I thought it was called:
HVAC Super Pro
Or something stupid like that. I remember reading "you'll ask: what did we do with leaks in walls, before hvac super pro?"
We used a dang torch. and people were happy at the end of the day.
That product should be named HVAC Super Hack.
"Better tell the sandman to stay away, because we're gonna be workin on this one all night."
"Dude, you need more than 2 wires to a condenser to run a 2 stage heatpump."
"Just get it done son."
Dad adjusted
I don't know what product it was. It was red, resembled a Loctite product, and I was able to break all joinings with only my hands. Whatever they used, it didn't work.
I've used the HVAC superpro on boiler water pipes once. They were in a wall an needed to be cut and capped and I had to work entirely by feel, they could not be seen to use a torch. It worked excellently.
The stuff I used was purple in color so it probably is not what was used in this case.
The SuperPro has like 10 warnings all over it that you must sand the fitting with coarse grit cloth and LEAVE THE FILINGS on the pipe and fittings. If you wipe them off it won't harden properly.
So was the drier and solenoid put in recently or has it actually been able to run for a while with all the joints glued together with red loctite?
That is so bad it isn't even funny it's sad No pride at all!
Did the red magic glue make it hard to solder it? How much of a charge did he loose?
I was concerned about bits and chunks of that stuff finding its way into the TXV, so the solenoid valve and all copper in that section were replaced. With a torch and silfos. One jug of R404a later, had a cold freezer.
It's too bad, it would be really cool if there were some 'magic glue' that actually worked.