Condensate Alarms for Mini-Splits
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2006
    Location
    Central NH
    Posts
    10
    We install mini-splits and have used Aspen mini pumps. Would like to find an alarm for pump failure. They are set up to be wired to shut down compressor. Any suggestions.

  2. #2
    Join Date
    Aug 2006
    Posts
    2,583
    Most compact one I've seen is ICM340. You need 99% isopropl alcohol to clean aplace to stick the tape, and to clean the probes during maintenance. The bult in time delay eliminates a lot of nuisance trips. The two probes are nice too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event