what equipment is this?
hi to all,
Great site you guys and gals have going here. I recently purchased a cold storage facility that has been out of operation about 20 years or so. It is a 9000 sqare foot building with 3 floors (about 3000 sq/ft a piece) In the middle floor there is a freezer/cooler of some sort (see picture). It is in excellent condition. Hardly any rust and looks to be well preserved.
It was made by Frigid Coil. I did some research and frigid coil is now part of Frick. However, No one could tell me much on this equipment. Mainly because i talked to no one. I was just re-directed to the next person over and over again. Has anyone had any experience with this Or know what equipment this is? There was some info on the name plate but have lost all info at this time except model number which I had written down.
Model number: RALT-G-9000P.
Thanks guys in advanced for any help you can give me.
This is the Ask Our Pro's forum, and only Pro members that have been vetted by the AOPC may post advise, commentary, or ask questions of the OP here. Please apply to the AOPC today, thank you.
You can find the rules for posting and qualifications here.
Further infractions may result in loss of posting privileges.
Last edited by beenthere; 01-06-2013 at 02:36 PM.
Reason: Non Pro * Member
My sense is that you have all the info that will be available, unless someone has serviced this specific model of fan coil.
[Avatar photo from a Florida training accident. Everyone walked away.]
2 Tim 3:16-17
RSES CMS, HVAC Electrical Specialist
AOP Forum Rules:
looks like an ammonia evap coil for deep freeze use.
Originally Posted by TexasZ71
because of those steel looking tubes bends on the end of the coil. it could be a medium temp(refridgerator) cooler, again most likely ammonia freon. if its still piped up, do not cut into the system as it can hold enough ammonia to fllood the room and death is very quick.