Results 1 to 9 of 9
  1. #1
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    285

    Moved an AH to diffrent location in home

    Name:  IMG_4837.jpg
Views: 380
Size:  33.2 KBName:  IMG_0152.jpg
Views: 346
Size:  38.3 KBName:  IMG_2703.jpg
Views: 359
Size:  39.8 KBName:  IMG_5123.jpg
Views: 357
Size:  37.0 KBName:  IMG_0911.jpg
Views: 332
Size:  47.8 KBName:  IMG_5381.jpg
Views: 330
Size:  43.2 KB


    Just a little side job.. All new copper and drainline inside and out. duct work and the whole 9 yrds
    (((PEACE IS THAT BRIEF MOMENT IN HISTORY WHERE EVERYBODY STANDS AROUND RELOADING)))

  2. #2
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    3,787
    where does the vent pipe from the trap go?

    tubing looks good outside.

  3. #3
    Join Date
    May 2009
    Location
    Savannah, Ga/H.H. Island, S.C.
    Posts
    1,403
    No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.

  4. #4
    Join Date
    Jan 2011
    Posts
    588
    Put the drier inside. Never rust out in the house..

  5. #5
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    285
    Quote Originally Posted by gravity View Post
    where does the vent pipe from the trap go?

    tubing looks good outside.
    Its just a little bit long, its open right under the deck, preciate it

    Quote Originally Posted by Brent Ridley View Post
    No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.
    Lol yeaa figured somebody would ask about that, i had another tee but didnt have a cap on hand soo i didnt glue the 90 going down
    (((PEACE IS THAT BRIEF MOMENT IN HISTORY WHERE EVERYBODY STANDS AROUND RELOADING)))

  6. #6
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    285
    Quote Originally Posted by Brent Ridley View Post
    No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.
    Savanna GA huh, im from screven county, right inbetween savannah and augusta
    (((PEACE IS THAT BRIEF MOMENT IN HISTORY WHERE EVERYBODY STANDS AROUND RELOADING)))

  7. #7
    Join Date
    Jul 2008
    Location
    Rochester NY
    Posts
    4,700
    Outdoor service outlet, nice.
    Which makes more sense to you?
    CONSERVATION - turning your thermostat back and being uncomfortable. Maybe saving 5-10%
    ENERGY EFFICIENCY - leaving your thermostat where everyone is comfortable. Saving 30-70%

    DO THE NUMBERS! Step on a HOMESCALE.
    What is comfort? Well, it AIN'T just TEMPERATURE!

    Energy Obese? An audit is the next step - go to BPI.org, or RESNET, and find an auditor near you.

  8. #8
    Join Date
    Aug 2006
    Location
    Panama City, FL
    Posts
    738
    So, if you're not terminating the vent for the drain above the level of the float switch, what happens when the drain clogs downstream of the vent? The water pours out of the vent before it has a chance to trip the switch. We always terminate above the height of the primary pan, even if it means drilling another hole in the deck.
    You can't learn a thing with your mouth open.

  9. #9
    Join Date
    Nov 2011
    Location
    Texas
    Posts
    285
    good point i always make sure to do that with units in hung cielings, guess i didnt think about it too hard under the deck
    (((PEACE IS THAT BRIEF MOMENT IN HISTORY WHERE EVERYBODY STANDS AROUND RELOADING)))

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event