Ever heard of a wire tie?

[socotech]

Attachment 332671







1) wires not tied back together
2) wooden condenser stand
3) compressor on right has been replaced but they left old liquid line drier

[socotech]

[ryan1088]

I've noticed that Trane likes to have a gobbly-goo of wires in their condensers, we just have to deal with it! An yes if you cut the wire ties off, it only takes 3 minutes to put a few new ones on!

[qwerty hvac]

They didn't want to get the touch out to change the drier.


Sent from my iPad using Tapatalk HD

[nick muniz]

Anybody else hate wire ties with flying ends, I lose sleep if I forget to trim them off.

[Rodney28334]

ditto on filter dryer and not wanting to drag out torches. Hopefully it wasnt a burn out. I have a touch of ocd when it comes to trimming wire ties also, but in a bundle that big got to be carefull not to nip a good wire in the process.

[craig1]

If they didn't want to drag out the torches, they could have cut that dryer out and put in a flare dryer

[socotech]

I can't justify in my mind any reason the drier wasn't changed. I like to relocate drier outside the condenser so next time unit can be pumped down to change it.

[SBKold]

Is the way that the suction line sweats directly on ll line a engineered seer boost?

[CoolWine]

Is the way that the suction line sweats directly on ll line a engineered seer boost?

passive subcooler

I noticed that as well, I'd insulate it.

[Musick94]

Same here!

[blitz]

you're lucky if I put the ties back in after tracing all the wire I need....

[SEIDexter]

Was always curious with those orange Trane herm compressors. Are they reciprocating?