So we purchased our home and I am going to try to get the fireplace to start. We have a older model Heat N Glo 6000 GDV model.
Here is my situation - Firstly, thank God there is a forum like this
1. Fireplace gas is on and running
2. I have a wall switch
3. Toggle On/Off switch behind the louver
4. A remote box installed. Model Heat N Glo RCH-09a. But the remote is nowhere to be found.
So I was able to get the pilot to light last night and it stayed lit. Now I am completely new to this but am good and learning and fixing things. Now before I go too far, I got the pilot to light but never noticed there was a ON so I never turned it to on which is why I believe I could never get the main unit to come on.
My question is with the fireplace set to use a remote and it is lost, is there a way to go back to running it without. I just want to make sure it will ignite manually and that the thermopile is not out.
Here is what the setup looks like. So I am trying to see if I can remove the remote box but I don't know if I need to connect the 2 red wires from the ON/OFF toggle switch to the igniter RH and TP/RH. I just feel like the fireplace will not start without the remote so I want to remove the remote all together. Then once I know its working, I will go get a new remote.