Results 1 to 12 of 12
  1. #1
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589

    Chev and Dodge van

    I have two vans I would like to sell. One is a chev 2007 in great shape all detailed and ready to roll. It has latter racks and complete Adrian bin HVAC package. The miles are in the low 80 K range. Looking for 14,500. We paid in the neborhood of 28 K with bin and latter package. I also have a great looking 2003 dodge short base Van V6. it too is in great shape with custom bin package and latter rack, has new tires and runs great asking $4200.00 for that . My cell 760 403-3751 Thanks Ron

  2. #2
    Join Date
    Aug 2009
    Location
    Beatrice, NE
    Posts
    2,305
    I couldn't see the pictures, Ya gotta have pictures.

  3. #3
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    Ok here are pic'shttp://hvac-talk.com/vbb/attachment.php?attachmentid=330561&d=1354126443&th umb=1&stc=1http://hvac-talk.com/vbb/attachment.php?attachmentid=330601&d=1354126470&th umb=1&stc=1http://hvac-talk.com/vbb/attachment.php?attachmentid=330591&d=1354126463&th umb=1&stc=1http://hvac-talk.com/vbb/attachment.php?attachmentid=330651&d=1354126497&th umb=1&stc=1


    Girs not for sale Mistake
    Attached Images Attached Images           

  4. #4
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    Try it again with dodge vanhttp://hvac-talk.com/vbb/asset.php?fid=325361&uid=1006&d=1354127795http://hvac-talk.com/vbb/asset.php?fid=325371&uid=1006&d=1354127802
    Attached Images Attached Images           

  5. #5
    Join Date
    Feb 2008
    Posts
    130
    how much for the secretary?

  6. #6
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    Quote Originally Posted by Vinster View Post
    how much for the secretary?
    Lets make a deal

  7. #7
    Join Date
    Aug 2005
    Location
    iowa
    Posts
    1,649
    man ron, you are so lucky. i looked at an 04 dodge in iowa. 1200 bucks. the floor had 2 rust holes you could stick you hand thru, and the rocker panels were non existant

  8. #8
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    Quote Originally Posted by jeep6275 View Post
    man ron, you are so lucky. i looked at an 04 dodge in iowa. 1200 bucks. the floor had 2 rust holes you could stick you hand thru, and the rocker panels were non existant
    This Dodge is well cared for . I am setting it up as we speak for me to run calls . I just like it. it's been in the Desert of California absolutly no rust . it's has new tires and like I said full bin package, and latter rack. I think it would be a great starter van for a new start up

  9. #9
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    I'am now using the dodge . the chev is still available

  10. #10
    Join Date
    Feb 2012
    Location
    Toronto Canada
    Posts
    1,090
    with wet willy and flame boy Those should sell in NO time!!
    Those are some clean service trucks. If that dodge was in canada it would just be a frame left

  11. #11
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    Quote Originally Posted by OldSchoolMech View Post
    with wet willy and flame boy Those should sell in NO time!!
    Those are some clean service trucks. If that dodge was in canada it would just be a frame left
    I have family in Bramton and thats what they tell me. I enjoy driving the dodge over the chev. I have had both on truck trader for 4 weeks and not one bite, not even a call. I think it's just hard selling anything right now. I expected to get a call or two from back east guys or your area but nothing. Cleaned well cared for and no rust, and no calls.

  12. #12
    Join Date
    Dec 2000
    Location
    Victorville Ca
    Posts
    4,589
    OK I will

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event