Ok Im a HVAC guy never played with appliances. My wife has been complaining about her oven taking to long to cook things its a Whirlpool 465 accubake Gas range. I put the gas line in myself so I know that is at least sized correctly. Today I took my digital thermometer and stuck the probe in the oven I had the oven set at 350 and had let it pre heat set the thermometer on data log and the oven would cycle on at 310f and cycle off at 353f.
Question 1 is what would the normal cycle range for a residential oven be?
Question 2 is where should the display temp be set? My personal though would be when I have the oven set at 350 I would want the oven to cycle between 330f and 370f but then again I'm just a HVAC guy.
Any help would be greatly appreciated and get the wife off my back.