Page 2 of 2 FirstFirst 12
Results 14 to 17 of 17
  1. #14
    Join Date
    Dec 2007
    Posts
    4,576
    as has been noted, Pulse furnaces are no longer supported by Lennox. What parts are in stock, if any, is all that exists. If you do need a part and it is on the open market, it will cost you!!!

    I would not retrofit anything into a Pulse, even if I got it at wholesale.

    Have HX pressure tested and use the money you are willing to put into it along with the credit Lennox gives towards a Pulse replacement and get a new furnace.

    My $.02
    The Food Stamp Program, administered by the U.S. Department of Agriculture, is proud to be distributing the greatest amount of free meals and stamps EVER.
    Meanwhile, the National Park Service, administered by the U.S. Department of the Interior, asks us to "Please Do Not Feed the Animals". Their stated reason for this policy "... the animals become dependent on handouts and will not learn to take care of themselves."
    from an excerpt by Paul Jacob in Sun City, AZ

  2. #15
    Thanks for all the insight on my situation and it was interesting reading about that ECM x13 motor.Like one of you mentioned Im living on borrowed time with this 24 yr systems, i should be proactive. thanks again

  3. #16
    Quote Originally Posted by t527ed View Post
    Pulse furnace would be running at air conditioning speed when fan is in on position.

    creative use of relays could make the old motor or one of the new evergreen motors run at a reduced speed.
    t527ed
    ive read your post several times .then it dawn on me to take reading in auto .sure enough it reads 4.5 amps instead of 6.3amps which is about $300 cheaper than ON setting.i think ive read where the motor in pulse was a three speed .

  4. #17
    Join Date
    Mar 2005
    Location
    burlington county n.j.
    Posts
    9,642
    Quote Originally Posted by metal center View Post
    t527ed
    ive read your post several times .then it dawn on me to take reading in auto .sure enough it reads 4.5 amps instead of 6.3amps which is about $300 cheaper than ON setting.i think ive read where the motor in pulse was a three speed .
    depending on the model it could be any where from a 3 to 5 speed motor.

Page 2 of 2 FirstFirst 12

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event