Results 1 to 3 of 3
  1. #1
    Join Date
    May 2011
    Location
    Northern, NJ
    Posts
    10

    Regarding a trane baysens019c stat

    Customer called regarding no display appearing after power to building has been off for some time. 2 stats in place and 1 is working as it should. Problem on rtu or does it have to do with batteries or stat fried? Only asking cause stat will take a few days to get to replace and the job site is about 2 hours away.. Thanks

  2. #2
    Join Date
    May 2004
    Location
    SE Pennsylvania
    Posts
    923
    More then likely no power, tripped breaker, but just a guess.

  3. #3
    Join Date
    Aug 2006
    Location
    Colorado
    Posts
    304
    No batteries in that one. Could be the sensor, or the main board. Remember, on a trane, it's not a thermostat, it's that darn programmable zone sensor, and darn expensive too.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event