Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2010
    Post Likes

    Charging water source heat pump via sh

    Hey guys,

    I'm not one who works on WS heat pumps often, but I've been assigned a hotel that has a load of them. Anyway getting down to the question. It's an old McQuay unit (1988). I'm just looking to top of the unit I'm currently working on, that uses a R-22. In the shop they've got access to the loop. The temp usually sticks to 72.

    Should I choke the supply line to stimulate a 95 degree water coil condenser? But at the same time I've heard that 85 degrees is ideal for the heat pump loop with no more than a 10 degree diff. Any info could save me a bunch. Thanks in advanced. I can post some psi if you guys need.

  2. #2
    Join Date
    Sep 2008
    Western PA
    Post Likes
    Moved thread to Tech to tech Commercial.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.