I run with a set of these. Nice 4 in one from craftsman
They work great, it's a four in one set so two of them you get 8 different sockets.
20bucks for the set
Like these - and I have xmas gift cards for Sears.
I keep a 1/4" Snapon set with extensions and swivel on the truck somewhere but rarely have to resort to it. A few Craftman sockets and drives in my motor change out bag with the puller. Primarily residential, blower motor and compressor change outs are the only time I can think to grab them.
Yeah, I had to zoom in on my phone and then I could see the two different sizes on each end.
yup four sizes on one wrench.
They are not small, and can be difficult to get in to tight areas. But they are built solid.
I also carry a small open end wrench set for places the box end can't get in to.
I use Proto and JH williams. Once you use a good set of sockets you will never go back to lower quality set. Just the feeling on how tight good sockets fit on nuts and bolts is amazing.
If you need a good source for proto tools try toolup.com. Their prices can't be beat. I highly suggest Proto's combo racheting reversible wrench sets. They are a great time save which are extremely reliable. I don't know how i worked with out them. I can have a blower motor removed and reinstalled with in 20 minutes not corners cut EVER. I even grease the shaft for future wheel replacement.
This is the set i've had for 3 years and they are abused. I do have about three more wrenches i've added to the set which i use for certain tasks. Your better off getting this set and then just add as you go along. I like gear wrench bu these proto still work way better. Tools are my hobby. LOL