Results 1 to 2 of 2
  1. #1
    Join Date
    Jun 2010
    northwest connecticut
    Post Likes

    ycav scr trigger boards

    I had posted earlier this year on a drive issue with a ycav wich turned out to be an scr trigger board!!!! Had the same failure a couple of weeks ago on the chiller sitting next to it. Anyone seeing these types of failures, and is there any underlying issues,( component recall ??) Any input would be greatly appreciated !!!!

  2. #2
    Join Date
    Aug 2006
    Mixing oil and fire with a big spoon.
    Post Likes
    did you check your fuses on the transient suppressor board? are they good? the trigger board draws its power from the main power supply...any spikes go right to it unless the transient suppressor board is good and working.
    Someday, I hope to be just as brave as Harry Stamper.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365