Results 1 to 2 of 2
Thread: BCM Ethernet/Alerton Gurus
11-18-2012, 11:55 PM #1
BCM Ethernet/Alerton Gurus
I would like to install a Jace as front end for a bunch of VLCs and avoid using a BCM Ethernet.
I would want use Envision 2.6 or 3.0 and program VLCs remotely via going through Jace (Jace's BACnet routing will be enabled). Has any of you taken this approach with successful results?
11-19-2012, 10:31 AM #2
Yup. It works just fine. I have done it with a few Jaces and also a few NAE's. You just create a new site in Envision and set the general systems setup to point towards your Bacnet router and off you go.