Page 2 of 4 FirstFirst 1234 LastLast
Results 14 to 26 of 51
  1. #14
    Join Date
    Sep 2007
    Location
    NH
    Posts
    1,193
    So did you install the flame retainer and regulator?

    Never mind missed the last post

  2. #15
    Join Date
    Feb 2006
    Location
    USA
    Posts
    4,381
    Interesting thread. Draft motor rotating the right way?

    Sent from my SCH-I800 using Tapatalk 2

  3. #16
    Join Date
    Sep 2007
    Location
    NH
    Posts
    1,193
    Is this natural gas?
    I would also check to make sure the draft motor is the same, rpm, wheel, rotation ect.

  4. #17
    Join Date
    Sep 2007
    Location
    NH
    Posts
    1,193
    To slow tonight I guess.

  5. #18
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    4,392
    i dont believe carrier. i called them yesterday about a motor mount kit. They swore up and down that this motor mount kit worked for the same unit i replaced the heat exchanger. I called them and verified the part I had in hand would work.

    Well guess what. It didn't work. I couldn't even rig it to work.

  6. #19
    Join Date
    Feb 2006
    Location
    USA
    Posts
    4,381
    On the talk of carrier. Anyone have the parts app? It's been good so far. One of the carrier distributors around here has a very lackadaisical counter guy. When I'm forced to go through him I have found to sometimes double check because he has screwed up. For instance quoting me a 3ph cond motor when I knew for a fact the one in question was 1ph. Anyway, its the CE app

    Sent from my SCH-I800 using Tapatalk 2

  7. #20
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    4,392
    for your unit i see a flue baffle in the parts list

    flue baffle; 48GS500114

    and NOx baffle

    insulation; 48SS500601

    how many pipes on bottom did you h/x have?

    I would try the 2 parts i listed above

  8. #21
    Join Date
    Sep 2007
    Location
    Nashville,Tn
    Posts
    30
    2

  9. #22
    Join Date
    Sep 2007
    Location
    Nashville,Tn
    Posts
    30
    i noticed that both part #'s have a 500 in it but the part #'s i have for two of the parts have 400 in them. Such as the inducer fan assembly is a 48gs400649 and the flue box collar is a 48gs400108. I do not know if this means anything?

  10. #23
    Join Date
    Sep 2007
    Location
    Nashville,Tn
    Posts
    30
    sorry about the slow responses, I just had my first child two weeks ago and I have been trying to spend some time with him!! It is natural gas. That is a good idea on the draft motor. I will check that!

  11. #24
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    4,392
    your parts numbers are right and the ones i gave are correct.

    the new heat exchanger comes with the NOx baffle. so dont worry about that.

    i would try the flue baffle. ill send you a pdf

  12. #25
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    4,392
    congratulations! I have my second one on the way in May. don't know the sex yet.

  13. #26
    Join Date
    Jul 2009
    Location
    Columbia, MD
    Posts
    4,392
    have you checked the orifices?

Page 2 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event