Thread relocated to the "Controls" section of the site.
Hi there! Can someone help, please?
I cant connect hawk controller...
Lan 1 port - 192.168.0.122 (Connected to switch)
Lan 2 port - 192.168.1.122 (Connected to PC)
I can ping both of them
https://dl.dropbox.com/u/46660587/HA...012_134301.png
But i still can't connect with web interface or Coach ax program. What can be the problem?
additional hardware info...
https://dl.dropbox.com/u/46660587/HA...2_133622_0.png
https://dl.dropbox.com/u/46660587/HA...2_133622_1.png
...Connected with rs 232 to change subnet of one of ports.
Kind regards. Vadim...
Thread relocated to the "Controls" section of the site.
Check your antivirus isnt blocking the port 3011
https://www.niagara-central.com/ord?...ionThread/8168
didn't use the commissioning wizard, did ya?
call support.
This should help you correct your libcpp-so-4 issue
Also read this blog about upgrading / downgrading.
http://www.niagara-central.com/ord?p.../BlogEntry/154
Thank you! I will try today!