honeywell Hawk with COACH AX problem.

[zaborius]

Hi there! Can someone help, please?

I cant connect hawk controller...
Lan 1 port - 192.168.0.122 (Connected to switch)
Lan 2 port - 192.168.1.122 (Connected to PC)

I can ping both of them

https://dl.dropbox.com/u/46660587/HA...012_134301.png

But i still can't connect with web interface or Coach ax program. What can be the problem?

additional hardware info...
https://dl.dropbox.com/u/46660587/HA...2_133622_0.png
https://dl.dropbox.com/u/46660587/HA...2_133622_1.png

...Connected with rs 232 to change subnet of one of ports.
Kind regards. Vadim...

[Chris_Worthington]

Thread relocated to the "Controls" section of the site.

[Keith D]

Check your antivirus isnt blocking the port 3011

[digo]

https://www.niagara-central.com/ord?...ionThread/8168

didn't use the commissioning wizard, did ya?
call support.

[TheTerminator]

This should help you correct your libcpp-so-4 issue

Also read this blog about upgrading / downgrading.
http://www.niagara-central.com/ord?p.../BlogEntry/154

[zaborius]

Thank you! I will try today!