Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    Jul 2007
    Location
    Columbus, OH
    Posts
    25

    Configuring a KMC Building Controller with Bacstage

    Does Bacstage have the necessary functionality to fully configure a KMC BAC-A1616BC Building Controller?

    If I recall, Bacstage can read, compile and send control basic to the building controller, but is not able to configure inputs/outputs, bv's, av's, etc. However, I should be able to configure these through the Building Controller web interface, correct?

    I am trying to eliminate the need to purchase the full Total Control package.

    Publishing graphics to the building controller is not a requirement.

    Thanks very much for any information

    -Mike

  2. #2
    Join Date
    Jun 2004
    Location
    SC
    Posts
    139
    You can configure and program the controller with BacStage.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event