Results 1 to 5 of 5
Thread: Quadra-Fire CB 1200
11-10-2012, 07:48 PM #1
Quadra-Fire CB 1200
Just purchased a used CB 1200, got it all installed and the ignitor will not get hot. The call light is on, exhaust is blowing, pellets drop, but no ignitor. If i light the stove manually it runs great until the thermostat shuts it off due to reaching desired temp. I purchased a new ignitor and it will not work, i pulled the ignitor from another Quadra-Fire stove and it will not work. Checked voltage at the plug and i get 0.
Is this fused or have some sort of sensor that could be bad?
Any help would be great, thanks.