Results 1 to 2 of 2

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    Corona Calif.
    Posts
    7

    ALC Module Compatibility

    I have a customer with a I/O Flex module running in WebCTRL on the ARC156 port. Just like a regular ALC module. Can we add a MEX to the Xnet? Or does it have to be a I/O expansion module.

    Thanks

  2. #2
    Join Date
    May 2009
    Posts
    634
    We had some modules where the xnet port was removed from the board and module driver and then renamed for our use.

    Check the board to see if it has the port. Check the driver and make sure it has xnet in there. If you have both I would say it should work.
    Scott Jalbert
    Harris Integrated Solutions

    Formerly Liebert (Emerson Network Power)
    Expressed opinions are my own

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event