-
KMD Protocol Conversion
I have a potential large customer that has a 4 building campus, each with over 100 KMDigital controlled heat pumps. They are looking for a central front end replacement. I have used Plexus in similar situations, but KMD is not supported by Plexus. Has anyone tried to integrate KMD into a non-KMC front end? Is there another name for the KMD protocol or any type of converters?
I believe KMC has a BACnet to KMD router, but it looks like each KMD point needs to be associated with a BACnet point in some type of control basic logic. Not being a KMC partner, this would not be an option for me.
Any advice would be appreciated.
Thanks,
-Mike
-
For the KMD protocol your only option is TotalControl as a front end from KMC. There is no other option and even as a KMC distributor I wish there were.
TotalControl can communicate both KMD, BACnet and modbus to integrate everything together but it is a very basic front end.
-Jeremy
-
Thanks for the info, I am familiar with Total Control, not a huge fan though.
The best solution I could come up with is the KMD-5779 OPC Server. Although there is very little documentation on this software, the guys at KMC says it should accomplish what I am trying to achieve.
Thanks,
-Mike
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
|
Related Forums
The place where Electrical professionals meet.
|