Results 1 to 5 of 5
  1. #1

    Flame Rod for Lennox G16

    Hello,
    I have a Lennox G16. when I pull out the burner (total of 3) for cleaning, I noticed there are two 20' metal rods attached over each of the burner by springs.
    I found it is all warped and two are broken. It there any way I can purchase and replace them.

    Thank you!

  2. #2
    Join Date
    Feb 2010
    Location
    Calgary, Alberta
    Posts
    1,151
    Good luck!
    Just about everything for that furnace has been discontinued.
    Check the heat exchanger at the dura curve, it's probably cracked.

  3. #3
    Join Date
    Feb 2010
    Location
    Calgary, Alberta
    Posts
    1,151
    Quote Originally Posted by syndicated View Post
    Good luck!
    Just about everything for that furnace has been discontinued.
    Check the heat exchanger at the dura curve, it's probably cracked.
    Correction: call a competent HVAC co. To check it out.
    Get a good carbon monoxide detector in the mean time.

  4. #4
    Join Date
    Aug 2012
    Posts
    2,753
    Why did you break them?

  5. #5
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,599
    Those are low NoX rods. They burn up easily, lucky to get near that long. Only thing can be done is replace the burners. Yes, the old Duracrack is probably hiding one!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event