WebCTRL wasn't the PIA, it was figuring out how to talk to the meter and how to get what I wanted out of it.
The first thing was to establish communication to it. The thing that is easy to skip over is that you have to power the DTR pin/wire
if you don't have it connected to a computer. So I used the 12 volts DC from the RNET connection (using an EQ-PRTL).
The other was what points to use and how to use them. (See Picture). I finally talked to tech support and they told me what was needed to get what I wanted.
"It's not that I'm smart, it's that I stay with the problem longer
Albert Einstein