I have about 10 LC-VAV-04 that get stuck to 50% and the only way i found to get these controller running is to "GET DRIVE TIME".
This get the motor running for about 2-3 weeks then it get stuck to 50%.
Originally they were configure has VAV mode then i tried VVT mode and it does the same.
The firmware is at 1.14.
Since i'm not a lynxspring dealer it seem to be hard to get the latest firmware.
I would like to get the firmware updated before i replace them.
This is all hook up to Niagara AX.
So does anyone have the latest APB-NXE-XIF, the AX Support package and the latest LC-VAV-04 configuration (AX).
The version that is onsite is :
Lynxspring AX support package 2.7.3
Lynxspring LC-VAV-04 configuration (AX) 2.0.0