You sure you didn't reset it?

[Joehvac25]

I went to an oil no heat today and the guy put a nozzle in himself but failed to close the 3/8 gap in the electrodes. When it fired holy hell!


Then found a nice hole!

[Northfloridatech]

Wow DIY...I went to one where the HO let his handyman change the nozzle with same result.....

[Joehvac25]

Wow DIY...I went to one where the HO let his handyman change the nozzle with same result.....

Ya that was half as bad as it was, I let it run again for a minute and really puffed. 2nd pic it's hard to tell but there's a big hole in cumb chamber, in the pic it looks like dirt or nothing.

[Northfloridatech]

Ya that was half as bad as it was, I lwet it run again for a minute and really puffed. 2nd pic it's hard to tell but there's a big hole in cumb chamber, in the pic it looks like dirt or nothing.

wow.....

[OldSchoolMech]

I hope you charged him BIG! For making you have to change you underwear.

[snupytcb]

I went to an oil no heat today and the guy put a nozzle in himself but failed to close the 3/8 gap in the electrodes. When it fired holy hell!


Then found a nice hole!

after a couple times of things blowing off the furnace i always inspect the combustion chamber for saturation before i fire it up. i have even had to strap the furnace and it's parts down before.

[Joehvac25]

after a couple times of things blowing off the furnace i always inspect the combustion chamber for saturation before i fire it up. i have even had to strap the furnace and it's parts down before.

I should have known when the HO said he changed the nozzle already! He was gone so I took my chances.
On the lighter side I heard a car wreck while I was outside getting fresh air, what I heard was " you ****ing muther ****ing retard you just hit my ****ing car you loser pos get a ****ing life". Then some back and forth same language and just screaming lol.