Results 1 to 5 of 5
  1. #1
    Join Date
    Oct 2009
    Location
    Nova Scotia, Canada
    Posts
    171

    Honeywell XL80/100

    I have a customer who has asked me to look at his control system. I am primarily a Delta tech. What he has is a Honeywell XL80 system.
    Does this require a propriatary software to configure? It seems to me that the IP that the OAT sensor is tied into is bad. My 20Kohm sensor checks out alright but is way off on the controller.

    What I am looking to be able to do is move the sensor from IP 5 to IP6 to see if it reads properly.

    Does anyone have any info on these? Name:  IMG-20121023-00015.jpg
Views: 112
Size:  39.4 KBName:  IMG-20121023-00016.jpg
Views: 103
Size:  20.2 KB
    Follow me @blankscole

  2. #2
    Join Date
    Jan 2002
    Location
    Fort Worth\Dallas, Texas
    Posts
    1,696
    It requires Honeywell's CARE software.
    Go Rangers!

  3. #3
    Join Date
    Oct 2009
    Location
    Nova Scotia, Canada
    Posts
    171
    Is this a licensed software or open?
    Follow me @blankscole

  4. #4
    Join Date
    Dec 2006
    Location
    Rhode Island, USA
    Posts
    28
    CARE software is proprietary. If you did have the software you would also need the project backup file to be able to re-assign the input to a different terminal. That file would have a name that would identify the equipment or plant and would have a file extension of " .pjt " You would have to have it on disc and do a project restore in CARE.

  5. #5
    Join Date
    Oct 2009
    Location
    Nova Scotia, Canada
    Posts
    171
    Oh ok. So it works a lot like LON. We definatly don't have the file or the software so I guess its time to call Honeywell. Or tear it out and put in a Delta controller.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event