770 ton Trane CVHF, bearing failure and a worn oil seal

Name:  1.jpg
Views: 3053
Size:  53.6 KB
Removing the economizer

Name:  2.jpg
Views: 2175
Size:  39.5 KB
Economizer sealed up for storage to prevent rust

Name:  3.jpg
Views: 2340
Size:  46.8 KB
Rigging of suction elbow

Name:  4.jpg
Views: 2322
Size:  44.2 KB
Removing suction elbow

Name:  5.jpg
Views: 2023
Size:  40.1 KB
Suction elbow covered to prevent rust

Name:  6.jpg
Views: 2060
Size:  45.2 KB
Compressor and evaporator flanges covered to prevent rust and prevent debris from falling in

Name:  7.jpg
Views: 2024
Size:  54.2 KB
Preparing to remove suction cover

Name:  8.jpg
Views: 2060
Size:  48.5 KB
Removing suction cover

Name:  9.jpg
Views: 2019
Size:  49.0 KB
Rigging the suction cover down and a shot of one of the work-tables where all of the tools return when we are done with something

Name:  10.jpg
Views: 2070
Size:  29.7 KB
Checking the run-out of the 1st stage impeller