Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2009
    Post Likes

    Modbus Badger water meter

    Has anyone done a integration from a M-2000 Badger water meter into AX ? I have my network setup and have the address' online but every register i use brings back the same info or a fault. We are using the 485 daughter board due to the length of wire from the jaces to the meters. If anyone has done this please chime in, and a point setup screen shot would be greatly appreciated.

  2. #2
    Join Date
    Apr 2009
    Post Likes
    Did you tried 0xCF address? The read telegram telegram should look like (if meter address is 1) 01 03 00 CF 00 02 XX.
    You should receive something like this 01 03 04 AA BB XX.
    Where XX is CRC, AA BB the value requested. If you received something else there is a error.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.