Results 1 to 3 of 3
  1. #1
    Join Date
    Oct 2005
    Location
    Omaha, NE
    Posts
    309
    Just want to 'educate' myself. I was reading somewhere and came across this:

    http://no_DIY.com

    What are the pro's and con's of HSI vs IFR?

    If I understand correctly, the HSI heats the filament so it is cherry hot, then gas comes out and burner is on.

    IFR is probably like modern gas stove (or gas grill), a spark is produced while gas is on, then burner is on.

    Any technology is better than the other?
    Just curious.




    [Edited by jrbenny on 10-23-2006 at 10:54 AM]

  2. #2
    Join Date
    Jun 2001
    Location
    Louisville, KY
    Posts
    12,178

    cn...

    Please don't link or post DIY sites on our site. As you are well aware, DIY discussion is prohibited by the forum rules.

    Thanks!
    Perhaps you should have read the instructions before calling.

  3. #3
    Join Date
    May 2004
    Posts
    11,985
    cn

    I know you are a self proclaimed DIYer. This is not the first time you have posted links to DIY sites.

    Please do not do it again or your account will be shut off.

    This will be your only warning from me.


    thx


    thread closed


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event