Results 1 to 13 of 14
Thread: MSEA 5.2 and CCT 5.3
Hybrid View
-
10-23-2012, 07:39 AM #1
Regular Guest
- Join Date
- May 2006
- Posts
- 557
MSEA 5.2 and CCT 5.3
Hello,
We just patched our Johnson system to 5.2.10 and installed the new CCT 5.3.
Now we can't launch the CCT from MSEA, under Tools. We can lauch it from it's own icon. The problem is that without being able to launch it from within MSEA, we can't use the ethernet passthru to communicate.
Thanks for any help
-
10-23-2012, 01:47 PM #2
Regular Guest
- Join Date
- Apr 2012
- Location
- Cape Coral Fl
- Posts
- 11
Did you do all upgrades before installing 5.2.10? I think there were patches that needed to be done before upgrade.
-
10-23-2012, 08:39 PM #3
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
The patch is exclusive and can be installed with out previous patches installed. As for CCT passthru you shoudl try to uninstall CCT and reinstall it...
Originally Posted by Tech83
UA Local 141
-
10-23-2012, 01:48 PM #4
Regular Guest
- Join Date
- Apr 2012
- Location
- Cape Coral Fl
- Posts
- 11
Is the Java the correct version?
-
10-23-2012, 04:13 PM #5
Professional Member
- Join Date
- Jul 2008
- Posts
- 1,114
you didnt place the dead chicken inside the pentagram before you put the silver dagger in did you??? Originally Posted by integrator
...now youre gonna need some 'eye of newt' prepared by a zombie
tsk tsk
...I couldnt help myself...its one of my favourite jokes about Johnson MSEA...sorry in advance for poking fun1 + 1 = 3 ( *** for very large values of 1)
...everybody wants a box of chocolates and long stemmed rose
-
10-23-2012, 08:41 PM #6
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
CCT 5.3 has a bacnet router connection option now, you do not have to open CCT from the tools menu to use the CCT ethernet.
UA Local 141
-
10-23-2012, 10:50 PM #7
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
OMG I let the secret out!!!!!!!!!!!!!!!!!
UA Local 141
-
11-11-2012, 09:55 PM #8
Professional Member
- Join Date
- Aug 2006
- Location
- Beachwood, NJ
- Posts
- 53
If you upgraded your CCT to 5.3, you will need the 5.2.5.0100 patch for passthru component to work properly on your pc or laptop. Email me and I can send you the patch.
-
11-12-2012, 11:03 PM #9
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
They already have 5.2.10 patch. Originally Posted by hvacpilot
UA Local 141
-
11-12-2012, 11:04 PM #10
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
Uninstall CCT and reinstall it and you will be fine or use the bacnet router option in CCT ......
UA Local 141
-
11-18-2012, 01:30 AM #11
Regular Guest
- Join Date
- Jun 2007
- Posts
- 134
On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg controllers bacnet routing enabled..... of course)
Sorry for the hijack.
-
11-18-2012, 10:32 AM #12
Professional Member
- Join Date
- Oct 2009
- Posts
- 490
Yeah forward port 47808 Originally Posted by kontrolthis
-
11-18-2012, 02:21 PM #13
Professional Member
- Join Date
- Nov 2005
- Location
- Shreveport, Louisiana
- Posts
- 2,240
[QUOTE=kontrolthis;14613711]On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg controllers bacnet routing enabled..... of course)
The IP port in the bacnet network needs to be enabled and be sure you know the network number of the trunk of the device you want to see....UA Local 141
Reply With Quote
