First of all, I hope that is all of the model number.
Second, can anyone tell me how they hold up the griddle portion of the unit? I have a set of these that are made as one on a steel frame, and one of the griddles is tilting towards the back corner opposite the drain corner. I think the hood cleaners must of stood on it. I am going to take off the front burner cover at 2:00 today when it is cool and see if there is anything obvious that is bent. I measured the suspect corner and it is lower than the respective corner of it's mate.
I researched the vulcan website and didn't find any manuals for this unit and have not heard back from tech support. Any help appreciated.