Results 1 to 9 of 9
10-15-2012, 08:14 PM #1
Is amprobe made by fluke. Is it good quality stuff.
10-15-2012, 08:27 PM #2Professional Member
- Join Date
- Jan 2010
Amprobe was acquired by the Danaher Corporation in 2006. Amprobe was awarded it's first patent for a clamp-on inductive ammeter.
10-15-2012, 08:27 PM #3
I have used the multimeter for 5 years so far with No problems.The meter is showing its age but it still works like new. For 109$ you can't beat it.
I wish I could find aligator clips for the leads thow
10-15-2012, 08:46 PM #4
I have used Amprobe for years. Strictly amps though. Great amp meter.You need to put the phone down and get back to work!
10-15-2012, 09:24 PM #5
Would these work your meter? http://www.amazon.com/Amprobe-TL35B-.../dp/B0029XJANE
10-15-2012, 09:31 PM #6
What about the temperature gauge. Looking at the amprobe rtf dual input for 100 bucks rather than the fluke 52 for 300 bucks
10-16-2012, 07:51 PM #7
Well I bought the tmd50 by amprobe today and hopefully it will be good. It's my first amprobe tool. But for 60 bucks instead of 300 I think it's worth a try its comparable to the fluke 52 and even looks the same just red.
10-16-2012, 08:45 PM #8
I have used it for like I said 5 years even used the temp sensor for super heat etc. I think for $100 it is awesome. I have used an UEI and didn't like the big dial MM it is too much. I wanna try a fieldpiece meter out
10-29-2012, 10:44 PM #9
Had my tmd 50 for a week and its great. Put it in a reach in cooler today and put it in record mode. Went and cleaned ice machine and came back found it was cutting out at 31 degrees and in at 35. Was great to be able to leave and come back and not have to sit there and watch the thermometer .