A year ago, we had a Goodman furnace installed and at the same time a new Honeywell Pro TH4110D stat. (furnace is two stage, stat is single stage - but goodman says this is correct set up, the board in the furnace controls the stages not the stat) anyway...... Since this time, we've noticed that our house becomes freezing before the stat kicks the heat on. The heat (when on) works really well, nice and toasty, but afterwards we're waiting way too long for the stat to come on again. House has to get freezing before the stat clicks on between cycling.
** I've adjusted the CPH many time, both up and down and haven't noticed much of a difference at all. Is it too sensitive, or not sensitive enough ? Should I move it to another wall ? Should I try a different brand, or better Honeywell model.
- we're freezing