Ritchie 60278 flaring tool.
Results 1 to 4 of 4
  1. #1
    Join Date
    Aug 2012
    Posts
    53

    Ritchie 60278 flaring tool.

    Anyone have an opinion on how good or bad this tool is?
    I like the clutch type CPS, but would like to know if the YJ is at least as good as a clutch type.

  2. #2
    It's not bad, but this is much better. I have an analog from ridgid.

  3. #3
    Join Date
    Aug 2012
    Posts
    53

    Cheers.

    Quote Originally Posted by antyar View Post
    It's not bad, but this is much better. I have an analog from ridgid.
    Actually the Rigid was the one of three choices, also lfetime warranty. Just wish they came in a small case.
    I like the system, but found Ritchie YJ has a quality about it's equipment so thought I would ask about others opinions.

  4. #4
    Join Date
    Aug 2012
    Posts
    53
    Can you explain a little more on how you find the YJ, pro's n con's.
    Does the Ridgid you mention the ratchet and does it have a clutch or torque release?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event