tip #1..unions are a dying breed, bank as much of your wages as you can..
Well I finally I'm going to start at a union shop doing commercial and industrial maintenance and service. I'm starting from the bottom as a first year apprentice. But I will be on my way to the big bucks. I really don't want to mess up this new job. Since I'm going to start out doing just pm's, any advice from some of the pros out their their would be great. Like things I should be doing to every unit, so I have a better handle on a unit that is running good. I want to utilize every time that I'm on a unit. That i get some info out of it. To become a better tech. I don't just want to start out by changing out the filter, quick coil/or burner clean, then slap the panels on. then I'm gone with the wind without even knowing if the unit is running good or not. So if any one has a good check list or quick tips on how to get vital info from the unit. That I can gain over time to improve myself over the years, from having my hands on these units. Thanks
tip #1..unions are a dying breed, bank as much of your wages as you can..
Have they told you your job duties yet. What they expect from you? How you will be trained?
Officially, Down for the count
YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET
I know enough to know, I don't know enough
Why is it that those who complain the most contribute the least?
MONEY CAN'T BUY HAPPINESS. POVERTY CAN'T BUY ANYTHING
Manuals manuals manuals!! Tablet or smart phone with lots of manuals manuals manuals stored in it!! To many different brands and types and such, that you will be seeing, to cover here. I have small spiral notebooks in ziplock bag in all the machines I service. Cards are OK but a notebook allows you to log the machine everytime. Keep a good log in every machine and you will start to notice things. Just writing things down will drill it into your brain pan. Write it all down. Pressures temps amps volts etc. that being said as a first year belt and filter changer you may not have the time or opertunity to do much more the change belts filters and wash coils. Be patient. You'll get there. Good luck.
Yeah I was non union for 10 years but you just can't beat the pay 1st year 17.00 hour with a 27.88 dollar package, 2nd year 19.53 with a 31.14 package, and so on until a journeyman 36.17 an hour with a 54.56 dollar package. Just never seen that with non union shops. And the raises are every year. I just put in two years at a non union shop started at 16.00 after 16 months they wanted to give me a 2% raise of 30 cents, and give me a story of the economy.
Yeah I was non union for 10 years but you just can't beat the pay 1st year 17.00 hour with a 27.88 dollar package, 2nd year 19.53 with a 31.14 package, and so on until a journeyman 36.17 an hour with a 54.56 dollar package. Just never seen that with non union shops. And the raises are every year. I just put in two years at a non union shop started at 16.00 after 16 months they wanted to give me a 2% raise of 30 cents, and give me a story of the economy.
So you've been in the industry for 10 years? Residential I assume? If you can find your way around a splitsystem, you should be able to find your way around a package unit up to 15 tons or so. Don't know how things work in your area, but in the Chicago metro area most shops utilize a filter company to do filter changeouts and employ coil cleaners, which is one step below an apprentice, so you shouldn't have to worry about that. Inspections vary from shop to shop and customer to customer. Your journeyman will have to show you what is expected during a PM. Tommy Knocker gave some good advice
Officially, Down for the count
YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET
I know enough to know, I don't know enough
Why is it that those who complain the most contribute the least?
MONEY CAN'T BUY HAPPINESS. POVERTY CAN'T BUY ANYTHING
commerical /industrial and in chi town your never going to llok back enjoy it especially with Winter MAint kicking in till 2013 the big tonnage shops are busy more now then in start up season...wait till you see the tonnages they have you hepling on...if a lead tech likes you and enjoys the day your in with him .just go with the flow take the BS that will be there...and gt out into a truck ASAP to be on your own even if it is picking up shop stuff to doing filters....keep in mind big tonnage guys grow roots on hi rise buildings....if your good with the meter and know gas fired rooftops the calls will have you busy...10 yrs in your primed to dive into the real world big cities end up with big bucks and OT....good luck
"when in doubt...jump it out" http://www.youtube.com/watch?v=U1qEZHhJubY
If your in Chicago I have one other piece of advice. MOVE!! It's more dangerous the Baghdad up there.
The majority of the violent crime is concentrated in a few neighborhoods on the south and west sides, and is primarily gang and drug related. I did my time working in those neighborhoods and don't miss it one bit.The police just came out with a report that 25% of the murders committed this year were by 1 gang. The crime in downtown Chicago is mostly political where they rape your pocketbooks..
Officially, Down for the count
YOU HAVE TO GET OFF YOUR ASS TO GET ON YOUR FEET
I know enough to know, I don't know enough
Why is it that those who complain the most contribute the least?
MONEY CAN'T BUY HAPPINESS. POVERTY CAN'T BUY ANYTHING
I walked the streets of Baghdad in 07-08 and didn't get freaked out, I did have body armor and a machine gun, but Chicago? No way!! Not this country boy haha.
Wah? Stop drinking the Kool Aid, it's making you look really silly.... Unions are strong and in many cases getting stronger. It's about representation in a large company, not about who can pee further..
If you knew what I made this last year it would make you ill...If you knew what I made for the company, you would simply pass out. One advantage of being union is the continued "free" training to keep up with the trade. If a class comes up that I am interested in, I simply "sign up and show up"... How many training classes have you been to lately?
Well said.. I will add that if it is a reputable shop, they should have a tasking list based on their expectations...
To the OP, I second the "don't buy into the I'm better than you because..." line of horse crap.
I wish you nothing but success my man... And congrats.
GT
If a day goes by and you have learned nothing, I hope you got a lot of sleep.
This is true do what works for you and yours
Was at expo last year seemed ok
Customer is alWays opposite of Left
OK gtjets, google union "membership is up" and "unions are dying"..
just for giggles:
http://www.fastcompany.com/3005101/u...hat-comes-next