Results 1 to 3 of 3

Thread: Draft hood!

  1. #1
    Join Date
    May 2012
    Location
    Grand Junction, CO
    Posts
    235

    Draft hood!

    Pretty sure this hood should be directly over the boiler, not on the roof. And with no cap on it. Lol
    Attached Images Attached Images  

  2. #2
    Join Date
    Dec 2002
    Location
    SouthEast NC ICW & Piedmont Foothills
    Posts
    7,635
    they couldn't decipher the illustrations
    It`s better to be silent and thought the fool; than speak and remove all doubt.

  3. #3
    Join Date
    Aug 2004
    Location
    S.E. Pa
    Posts
    6,140
    It has a diverter inside but it is not a listed rain cap for that B-vent. No storm collar either so they should be getting water damage. Flashing improperly installed-not tucked up under shingles for first half nor nailed down. Low pitch roof problematic anyway. With the roof flashing lying on top of the roof, I'd lift it to see if they cut away combustibles sufficiently for clearance. Without that flashing secured, the pipe could tilt and touch combustibles.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event