Results 1 to 2 of 2
  1. #1
    Join Date
    May 2006
    Post Likes

    JCI runtime program in the NAE "LCT"


    I need to create a runtime program, in which two boilers switch every 2400 hours. My DX9100 is full, so I need to do this in the NAE using LCT. The out put of this program will switch a DCO point in the DX9100 to switch in between the boilers.

    Has anyone done a runtime program in the LCT


  2. #2
    Join Date
    Mar 2012
    Post Likes
    The way I have done it in the past is to put runtime totalizations on the status of the pumps. Once the runtime is over 2400 hours, reset the totalization and change leads. I might be able to find a screen shot if you need one...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.