Results 1 to 2 of 2
  1. #1

    Comfort Point Subcontrollers not communicating to EBI R310

    In the last month we just added a new building with CP IPC controllers. At first everything ran fine, but just as the commissioning agent started work in the building we started losing VAV comms and then heat pump comms. The IPC controllers are still communicating, but it seems the sub devices are starting to disappear a few at a time. Is this an issue with the commissioning agent plugging in on the mstp bus or is this a problem with EBI?

  2. #2
    Join Date
    Sep 2007
    Location
    Australia
    Posts
    162
    Maybe check your laptops bacnet address?
    The DDC system... guilty until proven innocent

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event