Page 1 of 2 12 LastLast
Results 1 to 13 of 16

Thread: hobart m# 802

  1. #1
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    hi evryone, i worked for hobart for a short time rebuilt mixers: m200, m300, but never worked on the m802 mixer, i know my way around the elctrical plus the unit has a schamatic, under the top cover, but can anyone help me with the gear set up? i mean keys, bearings, brakes, what kind of grease, my fax is 713-529-4459 att jesse, the unit will not lift bowl, but i still need the lay out of the gears,i might have to rebuilt it , soon. thank you whom ever helps me out,

  2. #2
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Post Likes
    I worked for Hobart too for a little while , about 2 years. I still have some of my books, I could look and see what I have. I ran refrigeration service mostly, and some grey line.

  3. #3
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    thanks hvacmike33, i too worked for hobart,i still have the books for 200m-300m, so if u ever need them let me know, i hope u could find the m 802 im in a bain, thanks,

  4. #4
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Post Likes

    Smile

    Hey I do have a parts book that shows exploded view of M 802 and V 1401 mixers but its 43 pages long! If you tell me exactly what you need I can fax them to you. I also wanted to tell you about Hobart's website. If you log on and setup a user name and password , you can get all kinds of service and parts manuels. Its http://www.hobartlink.com . I downloaded a complete service and parts manuel for a ft 900 dish machine and a pulper

  5. #5
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    alright mike, my fax # is 713-529-4459 , thank u mike, listen if thers any question that i could help u withlet me know., mike i have the sycamatic, all i need is the gears set up , lift set up, yuk, when i rebuilt the m200 and m300 , i needed those gears set up or i would have got lost and i did plenty of them , but could not remenber the set up by memery, also to get to the gears on the 802 do take the belts and all the top asmbly, off, i looks like i might have to, but anyway mike on this web sight i will look into it i know hobart is very tight on all their products and parts, its hard to bilieve the web site will let anyone have access to it , what about the compatition. well i will check it out thanks againg bro,

  6. #6
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Post Likes

    Hmm my fax # is 713-529-4459

    I tried to fax you that info, but it wouldn't go through??
    I will try again later!

  7. #7
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    SORRY MIKE no paper, just loaded it thanks,

  8. #8
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Post Likes
    You should have recieved the fax by now.

  9. #9
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    mike, thanks, i got the fax , hey mike i didn't see the lower part of the unit , u know where the hook goos on , i forgot whts it call, by the way mike my is jesse, do u have e mail, mine is jesse.vega@hotmail.com

  10. #10
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Post Likes
    Jesse, are you talking about the planetary system? my e-mail at work is mmoore@avon.k12.in.us or home is hvacmike33@aol.com
    Let me know if you need the planetary parts breakdown.

  11. #11
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    there u go, thats it , the planatary ,i need to replace the planatary, please fax me the parts break down, and mike have u evr ribuilt one before. does the whole top assmbly come off? and where do i add the oil if and when i do need it, i see hex bolt on top,looks like the same screw that my oil pan has, but anyway i do have to replace the planatery, i have done this before in the past ,thanks mike, hey mike i told my boss hoe helpfull you been, he wants to send u a gift! that we produce i send u and e mail.

  12. #12
    Join Date
    Dec 2005
    Posts
    262
    Post Likes
    hey mike thanks for the website. we have alot of hobart stuff here and very few books on them. it will help me a great deal....................newbeetech i tore down a mixer last year if your not familer with them they can be a b*&%h if you know what i mean. good luck man

  13. #13
    Join Date
    Jun 2006
    Posts
    308
    Post Likes
    hey thanks hillbilly, but how did u get into hobart linke thay asking me foe an I,D, and password, i dont have one, ?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech365 Virtual Event