Page 1 of 2 12 LastLast
Results 1 to 13 of 16

Thread: hobart m# 802

Hybrid View

  1. #1
    Join Date
    Jun 2006
    Posts
    308
    hi evryone, i worked for hobart for a short time rebuilt mixers: m200, m300, but never worked on the m802 mixer, i know my way around the elctrical plus the unit has a schamatic, under the top cover, but can anyone help me with the gear set up? i mean keys, bearings, brakes, what kind of grease, my fax is 713-529-4459 att jesse, the unit will not lift bowl, but i still need the lay out of the gears,i might have to rebuilt it , soon. thank you whom ever helps me out,

  2. #2
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    I worked for Hobart too for a little while , about 2 years. I still have some of my books, I could look and see what I have. I ran refrigeration service mostly, and some grey line.

  3. #3
    Join Date
    Jun 2006
    Posts
    308
    thanks hvacmike33, i too worked for hobart,i still have the books for 200m-300m, so if u ever need them let me know, i hope u could find the m 802 im in a bain, thanks,

  4. #4
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153

    Smile

    Hey I do have a parts book that shows exploded view of M 802 and V 1401 mixers but its 43 pages long! If you tell me exactly what you need I can fax them to you. I also wanted to tell you about Hobart's website. If you log on and setup a user name and password , you can get all kinds of service and parts manuels. Its http://www.hobartlink.com . I downloaded a complete service and parts manuel for a ft 900 dish machine and a pulper

  5. #5
    Join Date
    Jun 2006
    Posts
    308
    alright mike, my fax # is 713-529-4459 , thank u mike, listen if thers any question that i could help u withlet me know., mike i have the sycamatic, all i need is the gears set up , lift set up, yuk, when i rebuilt the m200 and m300 , i needed those gears set up or i would have got lost and i did plenty of them , but could not remenber the set up by memery, also to get to the gears on the 802 do take the belts and all the top asmbly, off, i looks like i might have to, but anyway mike on this web sight i will look into it i know hobart is very tight on all their products and parts, its hard to bilieve the web site will let anyone have access to it , what about the compatition. well i will check it out thanks againg bro,

  6. #6
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153

    Hmm my fax # is 713-529-4459

    I tried to fax you that info, but it wouldn't go through??
    I will try again later!

  7. #7
    Join Date
    Jun 2006
    Posts
    308
    SORRY MIKE no paper, just loaded it thanks,

  8. #8
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    You should have recieved the fax by now.

  9. #9
    Join Date
    Jun 2006
    Posts
    308
    mike, thanks, i got the fax , hey mike i didn't see the lower part of the unit , u know where the hook goos on , i forgot whts it call, by the way mike my is jesse, do u have e mail, mine is jesse.vega@hotmail.com

  10. #10
    Join Date
    Apr 2005
    Location
    Central Indy
    Posts
    153
    Jesse, are you talking about the planetary system? my e-mail at work is mmoore@avon.k12.in.us or home is hvacmike33@aol.com
    Let me know if you need the planetary parts breakdown.

  11. #11
    Join Date
    Jun 2006
    Posts
    308
    there u go, thats it , the planatary ,i need to replace the planatary, please fax me the parts break down, and mike have u evr ribuilt one before. does the whole top assmbly come off? and where do i add the oil if and when i do need it, i see hex bolt on top,looks like the same screw that my oil pan has, but anyway i do have to replace the planatery, i have done this before in the past ,thanks mike, hey mike i told my boss hoe helpfull you been, he wants to send u a gift! that we produce i send u and e mail.

  12. #12
    hey mike thanks for the website. we have alot of hobart stuff here and very few books on them. it will help me a great deal....................newbeetech i tore down a mixer last year if your not familer with them they can be a b*&%h if you know what i mean. good luck man

  13. #13
    Join Date
    Jun 2006
    Posts
    308
    hey thanks hillbilly, but how did u get into hobart linke thay asking me foe an I,D, and password, i dont have one, ?

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event