pin extactor size?

[rickinil]

help me out guys--
i need a pin extractor for the plugs on ignitors-
refuse to cut the leads to make it work
but i dont know what size or where to get one
i know its not an .093 cause i tryed it at radio shack- no go
any help is greatley appreciated

[pacnw]

do a search on here, I found the info and bought one that does work.

I would give you the info, but I cannot remember. (.077 or .084)?

I will say I have used it maybe 3 times in 2 years. I have come to the conclusion, from bad experiences, that OEM is best.

[supertek65]

.084 is most common

on York chillers they are .77 or .84!!!!!!!!!!!!!!!!!!!!!

I have to order the connecors from JCI!!!!!!!!!

[slctech]

Here is the kit I got for about $30 bucks. It does everything from the small honeywell smartvalve square sockets to your average Molex/AMP style pins. Does both male and female.

http://www.sunbeamtech.com/PRODUCTS/...OOL%20KIT.html

[catmanacman]

Radio shack has some

[rickinil]

yea radio shack is where i tryed it they just didnt have the right size
i think its 084 but havent measured it yet
looks like that sunbeam kit might be the way to go
its funny you mentioned york-- in their infinate wisdom they put
the female plug on the ignitor eveyone else puts the male same body
just reversed plugs thats why i m lookin for this tool