Fyrite Pro 110 or Fyrite Tech 60??

[dab18351]

Hi....

I bought these two items on Ebay for cheap because both needed to be calibrated and i have done so from Bacharach. I bought the pro 110 for $45.00 plus shipping and the Tech 60 for $80.00 plus shipping. Which one of these is the better of the 2 and should i keep? I have been told to keep the tech 60? I would sell the other on Ebay with new calibration. Thanks for any input....

[purge]

I think the 110 may be a better unit, but since it's been discontinued, I don't know how long repair parts will be available from Bacharach if it needs to be fixed some time down the road. I have the Tech 60 and it's decent, but is a pretty basic entry level analyzer, IMO.
For what you paid though, I think I would probably just keep them both. Especially since they have already been serviced and the heating season is basically here.

[dab18351]

do you know if either of these does draft?

[purge]

Nope, neither one of them does draft. If you don't already have the instruction manuals or spec sheets, you can download them here to see what each can and can't do.

Pro 110: http://www.bacharach-inc.com/fyrite-pro.htm

Tech 60: http://www.bacharach-inc.com/fyrite-tech.htm

[purge]

Another thing about the Tech 60 is that I don't think the older version 24-7232 has the IR printer capability that the newer version 24-8217 does, even though they look basically the same.

[Jim Davis]

Keep the Tech 60. The 110 doesn't do CO.

[dab18351]

Another thing about the Tech 60 is that I don't think the older version 24-7232 has the IR printer capability that the newer version 24-8217 does, even though they look basically the same.

This one has the IR capablity..

[dab18351]

Keep the Tech 60. The 110 doesn't do CO.

Thanks Jim.. That is what i was looking for! The other goes on Ebay!