How to connect a Johnson Controls NAE35 to wifi?

[BACNet Jr.]

I have 1 NAE35, 1 PC, 2 Laptops, and 1 wireless router with 1 WAN, 3 LAN ports in the office. What else do I need so I can monitor and control the NAE35 system? and How I can do it?

[integrator]

I have 1 NAE35, 1 PC, 2 Laptops, and 1 wireless router with 1 WAN, 3 LAN ports in the office. What else do I need so I can monitor and control the NAE35 system? and How I can do it?

Is the NAE a existing unit? What IP address does it have currently.

Once you know that, you connect the NAE with a network cable to one of the LAN ports. If the NAE is setup with DHCP, it'll get a IP address from the router. Then using your laptop, wireless or connected to a lan port, you'll be able to log into the NAE.

If the NAE has a static IP address, you need to make sure thats' it's part of the IP scheme of the rotuer table.

[berg2666]

As stated above. Do you know how to commision an NAE.