Results 1 to 3 of 3
  1. #1

    Confused Trane XR80 Problem

    I know next to nothing about HVAC, so I apologize in advance for my ignorance on the subject.

    I have a less than two-year-old Trane XR80 in my house. When the furnace kicks in, what I'm assuming is the ignitor just clicks continuously. Nothing else happens- the blower doesn't start, no heat, etc. Additionally, the red LED diagnostic light is glowing red (no blinking)- according to a quick Google search, this means the control board needs to be replaced. This brings me to my questions:

    1.) Is it correct that the diagnostic light is indicating that I need a new control board?
    2.) Is this unusual for a relatively new (less than two years) furnace?
    3.) Ballpark, how much will a new control board cost?
    4.) Being a novice, is installing a control board something that is doable, or should I have a pro do it?
    5.) If the control board isn't the issue, any idea what the problem may be?

    Thanks is advance for the help.

    -Tim

  2. #2
    Join Date
    May 2000
    Location
    Indianapolis, IN, USA
    Posts
    34,087
    Sounds like you need a new board and a failure in 2 years isn't unusual sad to say. The part should be under warranty but you would pay labor.

    Sent from my HTC VLE_U using Tapatalk 2

  3. #3
    Sadly, I had a feeling that would be the case. Thanks.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event