Results 1 to 8 of 8
Thread: bacharach tech 60
-
09-27-2012, 10:31 AM #1
bacharach tech 60
Hey guys my bacharach tech 60 combustion analyzer just started reacting very slow. I've used it several times in the last month and just yeaterday it started doing this. Even after it acted slow, it later acted normal again. Now today its slow again.
Is my pump failing? I hear it running and it never changes tone or anything like that. Any ideas?
Thanks in advance
Jeepgeez!!! the more i learn the more i know i need to learn!!
-
10-01-2012, 06:49 AM #2
Regular Guest
- Join Date
- Feb 2012
- Location
- MOUNT BETHEL, PA
- Posts
- 13
It may be neeeding a calibration? when was the last one? Does the O2 read normal?
-
10-03-2012, 10:31 AM #3
I ended up just sending it in... we will see what they say
-
10-03-2012, 10:23 PM #4
Do you have a Dwyer 460 draft gauge? It should peg the ball to the top if you connect it to your meter. Maybe the pump is getting weak.
-
10-04-2012, 02:18 PM #5
Ugh. I'm insulted!!!... of coarse I have a dwyer 460.....now that you say it I also remember that it would peg the ball.... oh well I sent it in... hopefully I will remember next time... as. Always thanks for the help chuck!
-
10-25-2012, 01:43 PM #6
Professional Member*
- Join Date
- Dec 2004
- Location
- Metro Atlanta, GA
- Posts
- 95
have you heard what the problem is? My pump has stopped working. Also, the display is wonky. It's about 4 years old and has not been abused. I saw where they will fix it on their website for around $400. Not sure it is worth it. I am wodering what the cost was for you.
-
10-27-2012, 08:53 AM #7
Regular Guest
- Join Date
- Nov 2004
- Location
- Western NY
- Posts
- 982
-
10-28-2012, 10:21 PM #8geez!!! the more i learn the more i know i need to learn!!


Reply With Quote
